Joe's guide on how to remove your kick lever shaft from your XR350 & XR500?
First remove your kick lever and clutch cover.
Then, bolt your kick lever back on.
Lay the engine on it's side..
How to remove a kick lever shaft from a XR350 & XR500
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
How to remove a kick lever shaft from a XR350 & XR500
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: How to remove your kick lever shaft from your XR350 & XR
Now, pull the lever all the way down... and tap upward on the bottom of the kick lever.
You don't have to tap very hard.
The kick lever shaft will pop out but you will have to move it around a bit to get it out.
You don't have to tap very hard.
The kick lever shaft will pop out but you will have to move it around a bit to get it out.
If bikes are for kids I'll never grow up.
Who is online
Users browsing this forum: No registered users and 12 guests