KX500 foot pegs. What else will work?

A look at your chassis
Post Reply
Zerofear66
Posts: 27
Joined: Sun Mar 05, 2017 8:00 pm

KX500 foot pegs. What else will work?

Post by Zerofear66 » Thu Dec 14, 2017 7:56 pm

Does anyone know what other bikes will cross over?

Im looking for some wide, over sized pegs for 2003 KX500


Zerofear66
Posts: 27
Joined: Sun Mar 05, 2017 8:00 pm

Re: KX500 foot pegs

Post by Zerofear66 » Fri Dec 15, 2017 9:15 pm

Just ordered these little beauties.


https://www.ebay.com/itm/SUNLINE-Stainl ... 2749.l2649

User avatar
Sandblaster
Posts: 5479
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KX500 foot pegs. What else will work?

Post by Sandblaster » Wed Dec 20, 2017 3:27 pm

I just got a update from the member that started this thread and the pegs he bought from eBay did not fit.

If you don't mind a little grinder here and there, you can use the following pegs

Torque one sent us some killer foot pegs for a YZ450F for Sean Colliers bike "The Beast".
But they won't fit on a KX500.

Image



So, the first thing we gotta do is remove these tubes..

Image



Calling Mr. Sawsall..

Image



But they still won't fit...

Image



So into the vice for a little hand work..

Image




Grind, grind, grind, file, file, file...
Check it often... Unless you have a mill, then just mill it to the correct thickness..

Image




But, your still not done...

You will need to remove some more material as shown in yellow.
Go slow and do a ton of test fitting..

Image



Then a little clean up on the buffer..

Image
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5479
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KX500 foot pegs. What else will work?

Post by Sandblaster » Wed Dec 20, 2017 3:29 pm

On my Supermoto I used some pegs from a 1999 - 2015 YAMAHA YZ85/YZ125/YZ250/YZ250F/YZ400F/YZ426/YZ450F

Image



Sorry, I don't have a bunch of pics to show how I did it...
But all I used was a hand grinder and a file...
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5479
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KX500 foot pegs. What else will work?

Post by Sandblaster » Wed Jan 17, 2018 4:43 pm

Here is some dimensions on the Yamaha Torc 1 pegs that we modded for Sean's bike.
1516189023400_9404572396_6793cf8b.jpg
1516189023400_9404572396_6793cf8b.jpg (183.16 KiB) Viewed 65 times

1516189023407_106594872_6793cf8b.jpg
1516189023407_106594872_6793cf8b.jpg (183.49 KiB) Viewed 65 times
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5479
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KX500 foot pegs. What else will work?

Post by Sandblaster » Wed Jan 17, 2018 4:46 pm

Here is the IMS KX500 Core Enduro pegs
IMS KX500 ENDURO 101.jpg
IMS KX500 ENDURO 101.jpg (163.82 KiB) Viewed 64 times

IMS KX500 ENDURO 102.jpg
IMS KX500 ENDURO 102.jpg (151.93 KiB) Viewed 64 times
If bikes are for kids I'll never grow up.

User avatar
Sandblaster
Posts: 5479
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

Re: KX500 foot pegs. What else will work?

Post by Sandblaster » Wed Jan 17, 2018 4:49 pm

Here is the IMS KX500 Core MX pegs
IMS KX500 MX 101.jpg
IMS KX500 MX 101.jpg (162.04 KiB) Viewed 63 times

IMS KX500 MX 102.jpg
IMS KX500 MX 102.jpg (154.01 KiB) Viewed 63 times
If bikes are for kids I'll never grow up.

Post Reply

Return to “Chassis”

Who is online

Users browsing this forum: No registered users and 1 guest