Page 2 of 4
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Thu Oct 16, 2014 5:35 am
by Sandblaster
Yesterday I was asked if I could fix the machine and send them a bill...
NEXT!!!
Started working on it today.
Fixed the leg..
Fixed the light housing..
Working on the wiring...
Should be able to test it some tomorrow.
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Fri Oct 17, 2014 12:05 am
by Sandblaster
Got her up and running...
Owwwwweeeee!!!
Ahhhhhh!!!!
- kx500 head 100.png (1.37 MiB) Viewed 9077 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Thu Oct 23, 2014 3:04 am
by Sandblaster
- 20141021_163348.jpg (757.54 KiB) Viewed 9142 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Wed Nov 05, 2014 11:23 pm
by Sandblaster
Nissin Front brake calipers:
- NISSIN FRONT BRAKE CALIPERS.JPG (110.47 KiB) Viewed 9092 times
- NISSIN FRONT BRAKE CALIPERS 2.JPG (113.49 KiB) Viewed 9092 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Thu Nov 27, 2014 7:59 pm
by Sandblaster
1992 KX250 HEAD BEFORE AND AFTER
- 92 KX250 HEAD VAPOR BLASTING OEM-CYCLE 3.JPG (74.11 KiB) Viewed 9030 times
- 92 KX250 HEAD VAPOR BLASTING OEM-CYCLE 4.JPG (58.91 KiB) Viewed 9030 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Sat Nov 29, 2014 1:43 am
by Sandblaster
KX250F engine just received today.
- 2010 kx250f vapor blaster oem-cycle 1.jpg (160.79 KiB) Viewed 9025 times
After a little love
- 2010 kx250f vapor blaster oem-cycle 2.jpg (242.58 KiB) Viewed 9025 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Fri Dec 26, 2014 10:42 pm
by Sandblaster
- hub.jpg (126.15 KiB) Viewed 8981 times
- 20141226_102408-1.jpg (403.02 KiB) Viewed 8981 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Tue Jan 27, 2015 11:24 pm
by Sandblaster
- INTAKE MANIFOLDS 100.JPG (85.31 KiB) Viewed 8942 times
- INTAKE MANIFOLDS 102.JPG (98.6 KiB) Viewed 8942 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Tue Jan 27, 2015 11:25 pm
by Sandblaster
- INTAKE MANIFOLDS 103.JPG (74.52 KiB) Viewed 8942 times
- INTAKE MANIFOLDS 101.JPG (101.63 KiB) Viewed 8942 times
Re: Vapor Vapour or Aqua Blasting, Is it worth the expense?
Posted: Wed Jan 28, 2015 5:48 pm
by Sandblaster
- INTAKE MANIFOLDS 104.JPG (60.97 KiB) Viewed 8941 times
- INTAKE MANIFOLDS 105.JPG (47.7 KiB) Viewed 8941 times