KX500 V-FORCE 2 REED VALVES FOR SALE
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
KX500 V-FORCE 2 REED VALVES FOR SALE
KX500 V-FORCE 2 REED VALVES FOR SALE
Brand new.
You will not receive a factory box or literature.
170.00 each delivered anywhere in the USA by priority mail (2-4 days)
Or you can spend another 30 bucks and buy them through eBay
http://www.ebay.com/itm/KX500-KAWASAKI- ... 464cc83d1f
Brand new.
You will not receive a factory box or literature.
170.00 each delivered anywhere in the USA by priority mail (2-4 days)
Or you can spend another 30 bucks and buy them through eBay
http://www.ebay.com/itm/KX500-KAWASAKI- ... 464cc83d1f
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
I have bad news, good news, and bad news.
The bad news is I ran out of stock
The good news is I have a new supplier .
The bad news is I ran out of stock
The good news is I have a new supplier .
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
Should have a couple more to sell 4-4-14
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
4-21-16... Got a few more new VF2 reeds for the KX500
Get them quick!
Get them quick!
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
4-23-16 Both the VF2's for the KX500 and CR500 are Almost all gone...
If bikes are for kids I'll never grow up.
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
You mean this round of them are almost gone.... they are going into full production again says jeff
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
I bought 6 of the KX500's and 4 of the CR500's and I have only one left.
Probably will sell that one today or tonight.
When I ordered them about a week ago, Jeff said that they may or may not be building more.
Apparently there was still some discussion on it.
So, I guess we will have to wait and see.
I'm trying to order more but at this point I'm not going to hold my breath
Probably will sell that one today or tonight.
When I ordered them about a week ago, Jeff said that they may or may not be building more.
Apparently there was still some discussion on it.
So, I guess we will have to wait and see.
I'm trying to order more but at this point I'm not going to hold my breath
If bikes are for kids I'll never grow up.
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
I'll buy it from you. Jeff sounded certain when I broke the news at kxriders.net that they were going back into full swing.....
Also wanted to ask you. For my 98-99 kx250 cylinder, would you have a head and 2 coolant elbows, the inlet elbow just about the intake.... I'd maybe take 3 if ya had them. Not sure what other years are the same?
Also wanted to ask you. For my 98-99 kx250 cylinder, would you have a head and 2 coolant elbows, the inlet elbow just about the intake.... I'd maybe take 3 if ya had them. Not sure what other years are the same?
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 V-FORCE 2 REED VALVES FOR SALE
Oh man... I already sold the last one...
I hope we can get some more...
I'll check on the other parts for you in a bit
I hope we can get some more...
I'll check on the other parts for you in a bit
If bikes are for kids I'll never grow up.
Who is online
Users browsing this forum: No registered users and 10 guests