Pictorial for changing fork seals and bushings kx500
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Pictorial for changing fork seals and bushings kx500
Pictorial for changing fork seals and bushings in a kx500.
First thing I do is clean the forks....
Next, I measure how far the fork caps are sticking out from the triple clamps.
Then I count how many clicks to bottom out for the dampening and rebound adjustment screws.
From there I do it as follows..
Keep in mind this is not a complete description of everything I do but the pics for the most part line it out pretty well..
First thing I do is clean the forks....
Next, I measure how far the fork caps are sticking out from the triple clamps.
Then I count how many clicks to bottom out for the dampening and rebound adjustment screws.
From there I do it as follows..
Keep in mind this is not a complete description of everything I do but the pics for the most part line it out pretty well..
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Who is online
Users browsing this forum: No registered users and 8 guests