Page 1 of 1
JT Engine Works 1989 RM250 engine build
Posted: Fri Aug 12, 2016 12:18 am
by Sandblaster
I'm a bit late in all of this...
So this is a quick recap.
Disassembled, Vapor blasted, lapped, and vapor blasted again engine cases.
All new bearings, seals, gaskets, o-rings, washers, bushings, snap rings, alignment pins, ect.
The crank is balanced, polished rod, trued, welded.
The cylinder is plated but left at stock bore with stock port timing.
It does have some scuff n buff to clean up the factory casting flaws..
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 101.JPG (181.99 KiB) Viewed 5766 times
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 102.JPG (163.21 KiB) Viewed 5766 times
Re: JT Engine Works 1989 RM250 engine build
Posted: Fri Aug 12, 2016 12:19 am
by Sandblaster
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 103.JPG (256.17 KiB) Viewed 5765 times
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 104.JPG (192.73 KiB) Viewed 5765 times
Re: JT Engine Works 1989 RM250 engine build
Posted: Fri Aug 12, 2016 12:19 am
by Sandblaster
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 105.JPG (187.91 KiB) Viewed 5764 times
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 106.JPG (181.46 KiB) Viewed 5764 times
Re: JT Engine Works 1989 RM250 engine build
Posted: Fri Aug 12, 2016 12:20 am
by Sandblaster
Re: JT Engine Works 1989 RM250 engine build
Posted: Tue Aug 16, 2016 12:07 am
by Sandblaster
Jason made some more progress today..
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 110.JPG (132.57 KiB) Viewed 5758 times
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 111.JPG (164.67 KiB) Viewed 5758 times
.
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 112.JPG (152.55 KiB) Viewed 5758 times
It's really turning out nice...
Re: JT Engine Works 1989 RM250 engine build
Posted: Tue Aug 16, 2016 4:16 am
by Sandblaster
Re: JT Engine Works 1989 RM250 engine build
Posted: Tue Aug 16, 2016 4:16 am
by Sandblaster
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 116.JPG (165.22 KiB) Viewed 5753 times
- JT ENGINE WORKS 1989 RM250 ENGINE BUILD 117.JPG (169.81 KiB) Viewed 5753 times
Re: JT Engine Works 1989 RM250 engine build
Posted: Tue Aug 16, 2016 4:17 am
by Sandblaster