I was parting out a 91 CR500 with a odd stator and flywheel combo.
The flywheel is FP5135.
The stator is a 9 wire.
The CDI is a 6 Wire.
Looks like someone wanted lights but none were hooked up.
If anybody knows what this combo is for sure I would appreciate a heads up.
I have a lot of flywheel information but nothing on this one...
Thanks!
91 CR500 STATOR WITH LIGHTING COIL
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
91 CR500 STATOR WITH LIGHTING COIL
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: 91 CR500 STATOR WITH LIGHTING COIL
Stator Stator plate M18049D
On one loom
On the same connector
Green/White male bullet
Blue/White female bullet
The other loom
On the same connector
Brown male bullet
White female bullet
Blue female bullet
Yellow female bullet
******************************
CDI Wires
CDI is not 89-01 CR500
CDI is not 84-86 CR500
CDI is not any CR125 or CR250
CDI wires:
On the loom with the red sleeve:
On the same connector
White female bullet
Brown male bullet
Blue male bullet
On the same connector
Green/white male bullet
Blue/white female bullet
On one loom
On the same connector
Green/White male bullet
Blue/White female bullet
The other loom
On the same connector
Brown male bullet
White female bullet
Blue female bullet
Yellow female bullet
******************************
CDI Wires
CDI is not 89-01 CR500
CDI is not 84-86 CR500
CDI is not any CR125 or CR250
CDI wires:
On the loom with the red sleeve:
On the same connector
White female bullet
Brown male bullet
Blue male bullet
On the same connector
Green/white male bullet
Blue/white female bullet
If bikes are for kids I'll never grow up.
Who is online
Users browsing this forum: No registered users and 5 guests