I would sure like it back but don't expect to ever see it again.
I was working on my two piece clutch cover so the clutch cover was still attached by the radiator hoses.
As they were rolling it out, the governor fell out.
So at least I have a souvenir and some pics
I have posted ads all over Craigslist Oregon.
If you see my bike in New Jersey give me a heads up.
I'd love to take a relaxing trip back east.
Thanks for looking...
- P1010001.JPG (1.01 MiB) Viewed 7151 times
- P1010003.JPG (1.03 MiB) Viewed 7151 times
Hello ladies and gentlemen.
After many years of fun and relaxation someone decided that they needed my bike more then I did.
They broke into my shop at 3811 Cross St in Eugene, OR and stole my most favorite bike.
It's a 2000 KX500.
It has many external and unique features that would make the bike stand out.
It also has a host of mods that are not easy to find or even realize unless you have intimate knowledge of the bike.
Below is a list of some external features as well as some pics for you to check out.
I am offering a $1000 reward that leads to the safe return of my bike.
If you have any questions feel free to call me at 541-603-2993
2000 KX500
Pro circuit platinum pipe
Red ASI radiator hoses.
Custom aluminum over sized polished radiators
Radiator screens are glued to the mounts using Black RTV silicone
Works connection frame guards
House of Horsepower suspension front and rear
Red anodized master cylinder reservoir caps
Wide foot pegs
V-Force 2 reeds
Jetting pilot 55 main 168 needle is stock at the third position
Shock arm linkage dog bones custom length by EMIG
FMF power core 2 arrestor
92 KX250 rear fender modded to fit the kx500.
The fender has been painted black on the top with custom white decals.
It also has a flag mount sitting on top and drilled through the rear fender.
Factory FX seat
03 kx500 black gas tank
Black Excel front rim with a polished Talon front hub.
320mm EBC front brake rotor
EBC front brake rotor
Wiseco 86mm piston
Factory FX graphics
No toil air filter
Non polished Talon rear hub
TTO head and water temp gauges with hand made aluminum mount
Works connection skid plate
BBR triple clamps
Carbon Fiber front fork guards
Rear paddle tire
Front ribbed sand tire
777 front number plate
77 right side cover
no number on the left side cover
Black front fender
Carbon fiber rear brake caliper guard
1 1/8" bars
A special note to the thief:
This bike isn't really rare, it's not very new, however, I know every detail on it. So if it ends up on craigslist anywhere in the USA I will see it. If I see any parts from it on eBay I will see them and know that they are mine. Due to the nature of the bike and who I am, many many people know me and what my bike is. So if your riding with other people, your taking a huge risk. Yes, you can grind off the serial numbers and strip it down but there are so many special hand made mods to the engine and other parts that I will know they are mine and you will be caught. Yes, you can spray paint it and put some stickers on it but why waste the time and take a risk of going to jail?
Return my bike, no questions asked, and I'll have $1000 cash to put into your hand.
Thanks.
Mike
