XL600R HONDA Service Specifications page

HONDA XL600R MEASUREMENTS, SPECS, PICS
Need a measurement for a special project?
Post Reply
User avatar
Sandblaster
Posts: 5715
Joined: Thu Jun 07, 2012 3:50 pm
Location: Eugene, OR
Contact:

XL600R HONDA Service Specifications page

Post by Sandblaster » Mon Mar 04, 2013 11:08 pm

XL600R HONDA Service Specifications page

STATOR
FITS 83-87 XL600R 31120-MG2-015
Please take all measurements with the stator grounded.
The easiest way is to leave it attached to the engine.

Charging coil:
Check for continuity between the Pink and yellow wires.
The Ohms should be .95-1.29

Lamp Coil
Check for continuity between the white/yellow wire and ground.
The Ohms should be .4 - .55

*********************

Voltage regulator rectifier
Please take all measurements with the regulator grounded.
The easiest way is to leave it attached to the bike.
You might also want to double check it to make sure it is properly grounding to the frame.

Regulated voltage 13.7-15.3V

*********************

Specific Voltage
83-86 13.5-14.5V at 5000 RPM
87 13.7-14.2V at 5000 RPM

*********************

Ignition Timing
Initial
83: 6 deg BTDC at 1200 RPM
84 and newer: 11 deg BTDC at 1300 RPM

Full advance 31 deg BTDC at 4000 RPM
If bikes are for kids I'll never grow up.

Post Reply

Return to “HONDA XL600R MEASUREMENTS, SPECS, PICS”

Who is online

Users browsing this forum: No registered users and 1 guest