Here is some info about reed petal tension.
Low tension insure instant throttle response..
Intermediate tension increase mid-range responsiveness and pull..
High tension tension provides reed stability for improved high RPM operation..
I have never been able to run a KX500 up to a RPM where the reeds caused any issues being ran at the low tension setting.
Every pipe, carb, port timing, compression, ignition timing I have ran on the dyno all showed more performance while the petals were in the low tension setting.
All my personal KX500's have VF2s and are being ran in the low tension setting.
Installing a VForce 2 Reed valve in a KX500
Jetting and intake information
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: Installing a VForce 2 Reed valve in a KX500
Post by Sandblaster » Sun Jul 26, 2020 7:44 pm
If bikes are for kids I'll never grow up.
Return to “Carburetion, Induction, Fuel injection, Intake”
Jump to
- OEM-Cycle Dirt Bike Discussion Forum
- ↳ Featured riders Arik Swan, Sean Collier, and more
- ↳ Topic: Brakes, Suspension, Carburetor, Bottom end, Top end, Chassis, Discontinued parts, Wheels, Plastic, Tools
- ↳ Brakes
- ↳ Dirt Bike General Discussion
- ↳ Bottom end
- ↳ Carburetion, Induction, Fuel injection, Intake
- ↳ Races, Hill climbs, and general mayhem.
- ↳ Chassis
- ↳ Clutch
- ↳ Cooling... Keep it cool hot head :-)
- ↳ Discontinued parts
- ↳ Electrical
- ↳ Pipes Exhaust
- ↳ Plastic
- ↳ Suspension
- ↳ Top End
- ↳ Wheels, Drive, Chain, Sprockets
- ↳ Tools
- ↳ JT Engine works builds
- ↳ Riding stories
- ↳ Bike Builds and rebuilds
- ↳ Crazy Al's Racing builds
- ↳ Dirt Bike Technical discussion
- ↳ Dirt Bike maintenance
- ↳ *** STOLEN ***
- ↳ Tell us what you would like to see
- ↳ Who are you? Give us an introduction.
- ↳ Product Review
- ↳ GOOD DEALS AND ITEMS FOR SALE
- ↳ Mechanical problems
- ↳ Questions about your bike?
- ↳ Wanted! Looking for? Trying to find a?
- ↳ What do you ride?
- ↳ Dirt Bike Interchange Information
- ↳ eBay, PayPal, and Craigslist, deals and information
- ↳ Other fun stuff
- ↳ You Tube action!
- ↳ Outlaw Kart information Tech N talk
- ↳ Electric bikes
- MEASUREMENTS PICS & SPECIFICATIONS
- ↳ Kawasaki Measurements, Specs, Pictures
- ↳ KX125 Kawasaki Measurements, Specs, pics
- ↳ KX250 Kawasaki Measurements, Specs, pics
- ↳ KX500 Kawasaki Measurements, Specs, pics
- ↳ KLR650 Kawasaki Measurements, Specs, pics
- ↳ KLX300R KAWASAKI Measurements, Specs, pics
- ↳ KLX650R KAWASAKI Measurements, Specs, pics
- ↳ KX250F MEASUREMENTS SPECS PICS
- ↳ KLX650C MEASUREMENTS, SPECS, PICS
- ↳ KX100 MEASUREMENTS SPECS PICS
- ↳ KDX200 KAWASAKI PICS, MEASUREMENTS, SPECS
- ↳ KX450F MEASUREMENTS, SPECS, PICS
- ↳ HONDA Measurements, Specs, pics
- ↳ HONDA CR125 Measurements, Specs, pics
- ↳ HONDA CR250 Measurements, Specs, pics
- ↳ HONDA CR500 Measurements, Specs, pics
- ↳ XR650R HONDA MEASUREMENTS, SPECS, PICS
- ↳ XR600R HONDA MEASUREMENTS, SPECS, PICS
- ↳ HONDA XL600R MEASUREMENTS, SPECS, PICS
- ↳ HONDA CRF250R Measurements, Specs, pics
- ↳ HONDA CRF450R Measurements, Specs, pics
- ↳ SUZUKI Measurements, Specs, pics
- ↳ SUZUKI RM125 Measurements, Specs, pics
- ↳ SUZUKI RM250 Measurements, Specs, pics
- ↳ RMX250 SUZUKI MEASUREMENTS AND PICS
- ↳ YAMAHA MEASUREMENTS AND PICS
- ↳ YZ125 PICTURES AND MEASUREMENTS
- ↳ YZ250 PICTURES AND MEASUREMENTS
- ↳ YZ490 PICTURES, MEASUREMENTS, Specifications, and technical information
- ↳ YZ400 PICTURES, MEASUREMENTS, Specifications, and technical information
- ↳ YZ80 YZ85 Yamaha, PICTURES, MEASUREMENTS, Specifications, and technical information
- ↳ YZ250F Yamaha, PICTURES, MEASUREMENTS, Specifications, and technical information
- ↳ YZ450F Yamaha, PICTURES, MEASUREMENTS, Specifications, and technical information
- ↳ HUSABERG PICS AND MEASUREMENTS
- ↳ KTM Measurements, Specs, pics
- ↳ HUSQVARNA MEASUREMENTS AND PICS
- ↳ ATK MEASUREMENTS PICS & SPECIFICATIONS
- Kawasaki SR500 SR250 discussion Pics Tech Talk
- Approved Vendor List
Who is online
Users browsing this forum: No registered users and 5 guests