KX500 foot pegs. What else will work?
-
- Posts: 29
- Joined: Sun Mar 05, 2017 8:00 pm
KX500 foot pegs. What else will work?
Does anyone know what other bikes will cross over?
Im looking for some wide, over sized pegs for 2003 KX500
Im looking for some wide, over sized pegs for 2003 KX500
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 foot pegs
IMS has several pegs for the KX500..
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
http://www.imsproducts.com/Products/ind ... e&tyd=true
If bikes are for kids I'll never grow up.
-
- Posts: 29
- Joined: Sun Mar 05, 2017 8:00 pm
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 foot pegs. What else will work?
I just got a update from the member that started this thread and the pegs he bought from eBay did not fit.
If you don't mind a little grinder here and there, you can use the following pegs
Torque one sent us some killer foot pegs for a YZ450F for Sean Colliers bike "The Beast".
But they won't fit on a KX500.
So, the first thing we gotta do is remove these tubes..
Calling Mr. Sawsall..
But they still won't fit...
So into the vice for a little hand work..
Grind, grind, grind, file, file, file...
Check it often... Unless you have a mill, then just mill it to the correct thickness..
But, your still not done...
You will need to remove some more material as shown in yellow.
Go slow and do a ton of test fitting..
Then a little clean up on the buffer..
If you don't mind a little grinder here and there, you can use the following pegs
Torque one sent us some killer foot pegs for a YZ450F for Sean Colliers bike "The Beast".
But they won't fit on a KX500.
So, the first thing we gotta do is remove these tubes..
Calling Mr. Sawsall..
But they still won't fit...
So into the vice for a little hand work..
Grind, grind, grind, file, file, file...
Check it often... Unless you have a mill, then just mill it to the correct thickness..
But, your still not done...
You will need to remove some more material as shown in yellow.
Go slow and do a ton of test fitting..
Then a little clean up on the buffer..
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 foot pegs. What else will work?
On my Supermoto I used some pegs from a 1999 - 2015 YAMAHA YZ85/YZ125/YZ250/YZ250F/YZ400F/YZ426/YZ450F
Sorry, I don't have a bunch of pics to show how I did it...
But all I used was a hand grinder and a file...
Sorry, I don't have a bunch of pics to show how I did it...
But all I used was a hand grinder and a file...
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 foot pegs. What else will work?
Here is some dimensions on the Yamaha Torc 1 pegs that we modded for Sean's bike.
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 foot pegs. What else will work?
Here is the IMS KX500 Core Enduro pegs
If bikes are for kids I'll never grow up.
- Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: KX500 foot pegs. What else will work?
Here is the IMS KX500 Core MX pegs
If bikes are for kids I'll never grow up.
Who is online
Users browsing this forum: No registered users and 10 guests