As it turns out the crank and case bearing bosses were bad so it turned into a full rebuild..
I pulled the engine and took it apart.
Then I sent it Jason at JT Engine Works for a full rebuild.
- 20211022_144901.jpg (551.2 KiB) Viewed 3040 times
Arik Swans KX500AF
-
Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Arik Swans KX500AF
Arik brought us his AF bike last year for a electrical problem.
As it turns out the crank and case bearing bosses were bad so it turned into a full rebuild..
I pulled the engine and took it apart.
Then I sent it Jason at JT Engine Works for a full rebuild.
As it turns out the crank and case bearing bosses were bad so it turned into a full rebuild..
I pulled the engine and took it apart.
Then I sent it Jason at JT Engine Works for a full rebuild.
If bikes are for kids I'll never grow up.
-
Sandblaster
- Posts: 6313
- Joined: Thu Jun 07, 2012 3:50 pm
- Location: Eugene, OR
- Contact:
Re: Arik Swans KX500AF
As you can see, Jason did his usual super clean engine build.
Jason did his super MX port work, balanced the crank, adjusted the compression and she will be a MX destruction machine...
Jason did his super MX port work, balanced the crank, adjusted the compression and she will be a MX destruction machine...
- 20211110_134122_resized.jpg (405.85 KiB) Viewed 3039 times
- 20211110_134130_resized.jpg (419.54 KiB) Viewed 3039 times
- 20211110_134137_resized.jpg (387.56 KiB) Viewed 3039 times
If bikes are for kids I'll never grow up.
Who is online
Users browsing this forum: No registered users and 7 guests